Wood Milling Head Angle Grinder M14 – Set of 2

Routing wooden bowls and constantly repositioning because the tool doesn’t grip.

Anyone who works wood by hand knows the tedious reworking with inadequate attachments – the result remains rough, lacking control. This wood milling head made of hardened steel transforms any common angle grinder or drill with an M14 mount into a precise carving tool. With a 40 mm diameter, it works cleanly through softwood and hardwood – the result is smooth bowls, plates, and decorations straight from your own workshop.

Advantages

• No more hours of sanding afterwards: The cutting geometry of the hardened steel removes material in a controlled way – coarse hand rework is eliminated and the workpiece is finished sooner.
• No need to buy a second device: The M14 connection fits all common angle grinders and drills already available in the workshop – no new tool needed.
• No worries about wrong material: Hardened steel remains dimensionally and cutting stable over time, so there is no need to check if the attachment is dull or warped after many uses.

Specifications

• Material: Hardened steel
• Diameter: 40 mm (4 cm)
• Mount: Standard M14 for angle grinders
• Compatibility: Angle grinders and drills
• Application: All types of wood (softwood and hardwood)
• Scope of delivery: 2x wood milling heads, 1x instruction manual

Usage

1. Screw on: Screw the wood milling head onto the M14 mount of the angle grinder or drill and tighten by hand.
2. Milling: Start the tool at low speed, place the milling head flat on the wood surface and guide evenly along the grain direction.
3. Rework: For smooth hollow shapes, tilt the milling head slightly and continue working in circular motions until the desired depth and shape are reached.

Pro tip: For hardwoods like oak or beech, a medium speed and short passes are recommended – this keeps the surface clean and prevents the milling head from overheating unnecessarily.