Digital Clamp Ammeter – Multifunction Measuring Device

No measurement value readable – and the work comes to a halt.

Anyone working on cables under poor lighting conditions knows the problem: The display barely shows anything, the value disappears the next moment, and you fumble through troubleshooting with unreliable tools. The Digital Clamp Meter with large LCD display, built-in flashlight, and data-hold function puts an end to this – the current measured value remains frozen until you have noted it, and the automatic shutdown ensures the battery doesn't drain unnecessarily.

Advantages

• No measurement value is lost: The data-hold function freezes the current display value – no more frantic watching or having to measure the same point twice.
• No extra light needed: The integrated flashlight illuminates the work area directly – work in dark distribution boxes or flush-mounted installations without additional lighting.
• No more guessing whether the device is still on: The automatic shutdown function protects the battery – pick up the meter next time and it still has power.

Specifications

• Alternating current: 0.01 A – 600 A (Manual), 0.3 A – 600 A (Auto)
• Direct voltage: 0.1 V – 600 V (Manual), 0.8 V – 600 V (Auto)
• Alternating voltage: 0.01 V – 600 V (Manual), 0.8 V – 600 V (Auto)
• Resistance: 0.1 Ω – 60 MΩ
• Capacitance: 0.001 nF – 60 mF
• Temperature: -50 °C to 1000 °C
• Frequency: 50 Hz–60 Hz (current) / 40 Hz–2 kHz (voltage)
• Jaw opening: 25 mm
• Power supply: 2 × AAA batteries (not included)
• Measurement functions: AC/DC voltage, alternating current, resistance, frequency, NCV, continuity test, voltage test, diode test
• Display: Large LCD
• Package contents: 1 × Digital clamp meter set

Application

1. Insert: Insert two AAA batteries and turn on the device.
2. Measure: Place the jaw around the conductor to be tested, select the measurement range and read the value on the LCD – activate data-hold if needed to freeze the value.
3. Secure: After use, turn off the device or wait for automatic shutdown; use the flashlight for additional lighting in dark environments.

Pro tip: For cables that are difficult to access, first use the NCV function (non-contact voltage detection) to identify live conductors – only then apply the clamp. This saves time and significantly increases work safety.